Hardware Specialist Marble Polishing Powder (MADE IN ITALY)

Polishing of Granite, Marble, Quartz are all professional task, You may deem it as a simple task by seeing those professional effortlessly turn your flooring into super shine; We Call This experience!!!

If you are someone who is has no patient and totally not into DIY, a bit a bit blame product not good. Please do not buy this product. Just proceed to engage a professional to do the job for you. Thank You.

Size : 500 Grams

Country Of Origin : Italy

Application Area : Approx. 25m2/500g

Application

• Marble

• Calcareous Stones

• Terrazzo

• Engineered Stones

• Onyx

*** Recommended to use with a Polisher Machine.

Instruction - How To Use

1) Spread the polishing powder on the floor manually in a circle, approximately a couple of square metres (approx. 20 square feet). Position the single disc machine equipped with a natural fiber disc on the powder on the floor.

2) Using a sprayer, or with solution tank water control, wet the floor with water and then turn on the floor machine and work water and polishing powder into slurry. Add polishing powder or water as necessary to maintain a watery slurry. Rotation of the machine may splatter the slurry, so take care to protect adjoining areas of carpet, wood and walls.

3) Work areas of no more than 1-2 square meters (15-20 square feet) at a time. DO NOT ALLOW THE SLURRY TO DRY ON THE FLOOR AT ANY TIME.

4) After running the floor machine over the 15-20 square feet area 3 or 4 times, use window squeegee and pull across the area to check result. When a high polish in this area has been achieved, move the slurry with the squeegee to the next area to be polished.

5) Rinse the floor with clean water and make sure all polishing powder slurry has been removed from the surface and grout joints.

6) Repeat polishing process using the same slurry by adding water or polishing powder as needed, until the entire area has reached the desired polish.

7) Wash the floor thoroughly with clean water and alkaline detergent such as DECER-DOS or ULTRA STRIPPER and leave it to dry.