Gorilla Waterproof Patch & Seal Liquid Rubber Sealant Coating

Gorilla Waterproof Patch & Seal Liquid Rubber Sealant Coating

Gorilla Waterproof Patch & Seal Liquid is a flexible, rubberized coating that seals out water, air and moisture. Application is easy. It can be applied by brush, roll, trowel, dip, or pouring. Once applied, the self-leveling formula smoothly covers small gaps and cracks ensuring a watertight seal. When dried, Gorilla Waterproof Patch & Seal Liquid is paintable and temperature/UV resistant resulting in lasting repairs!

Features:

• Seals Out Water, Air, and Moisture
• Creates a Protective Coating
• Flexible
• Paintable
• Temperature Resistant
• UV Resistant
• Self-Leveling
• Apply by Brush, Roll, Trowel, Dip or Pour

Specification:

• Brand: Gorilla
• Product Type: Rubberized Liquid Coating
• Adhesive Level: High
• Colour: White, Clear, Black
• Container Size: 473 g (16 oz)
• UV Resistant: Yes
• Minimum Application Temperature:  50 degrees F
• Maximum Application Temperature:  120 degrees F
• Moisture Resistant: Yes
• Compatible Material: Tile, Rubber, Fabric, Wood, Aluminum, Brick, Glass, Concrete, Metal
• Cure Time: 1 to 2 Days
• Paintable: Yes
• Indoor/Outdoor: Both
• Gap Filling: up to 1/4"
• Shelf Life: 2 years unopened

Instruction to Use:

• Clean the surface of dirt, dust, grease, and oil. Make sure the surface is dried completely.
• Stir the contents for 30 seconds until it is thoroughly mixed.
• Apply to the surface by brush, roll, trowel, dip or pour. Ensure the surface is completely covered.
• Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24-48 hours

NOTE: Test the finished project with light water exposure to ensure all cracks have been filled. If the test fails, apply additional coats. Do not use for gaps larger than 1/4″. Apply between 50F and 120F.

PAINTING: Works with both latex and oil-based paints. When coating with oil-based paints, use a primer first before painting.

CLEAN UP: Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as brushes and rollers.