Wood-Kote Professional Non Flammable Wood Filler - 6oz

Wood-Kote Professional Non Flammable Wood Filler - 6oz for Wood Repair & Smooth Finishes

Wood-Kote Wood Filler is a versatile wood filler, grain filler, crack filler and edge filler designed to repair and smooth imperfections in wood surfaces. It can be used on a wide range of materials and applications, including timber, particle board, MDF, flooring, paneling and furniture. The filler can be sanded after application and may be tinted while wet or overstained when dry, making it suitable for various finishing requirements. Its formulation is designed to resist shrinking, sinking, cracking and falling out, while providing a suitable foundation for subsequent topcoats.

Features

• Won't Shrink, Sink, Crack or Fall Out. 
• Suitable for use in all Timbers including Partical Board M.D.F. (Custom Wood), Plaster Board, Flooring, Paneling etc. 
• Can be used as Wood Putty, Sanding Sealer, Prime Coat. Grainfiller, Crackfiller, Undercoat & Edge Filler all in one.
• Can be tinted in wet state or overstained when dry. Use any type of Colourant i.e. Water based Spirit based ochers etc. 
• Provides a strong foundation for all top coats inclc. single or two pack products polyurethanes, oils, acrylics, french polish wax etc. 
• Easy sanding. Sanded dust can be mixed with water for re-use. 
• Non Flammable, Non Toxic, Non Yellowing
• Takes nails, screws, planning, sawing, drilling and routing. 
• Can be used on Metal, Plastic, Fibreglass and in Foundries

Specification

• Brand: Wood-Kote
• Product Type: Wood Filler
• Model: TM04
• Container Size: 6oz (Approx. 200g)
• Application: Wood Repair, Grain Filling, Crack Filling and Edge Filling
• Suitable Surfaces: Timber, Particle Board, MDF, Flooring and Paneling
• Sanding: Suitable for sanding after application
• Topcoat Compatibility: Suitable as a foundation for various topcoats

Available Colours:

• B106 - Birch
• C112 - Cherry
• FM118 - Fir Maple
• N126 - Nature
• RO134 - Red Oak
• T108 - Teak
• TM04 - Naytoh
• TM07 - Ramin
• WH144 - White
• WL142 - Walnut

Directions:

• Surface should be free of finishes wax or contaminates. 
• Apply with putty knife, pressing firmly into place. 
• Filling deeper holes in layers of about 6mm allowing each fill to dry.
• Sanding after 15 to 20 minutes.