Gorilla Waterproof Patch & Seal Liquid Rubber Sealant Coating - 32 oz
Gorilla Waterproof Patch & Seal Liquid is a flexible, rubberized coating that seals out water, air and moisture. Application is easy. It can be applied by brush, roll, trowel, dip, or pouring. Once applied, the self-leveling formula smoothly covers small gaps and cracks ensuring a watertight seal. When dried, Gorilla Waterproof Patch & Seal Liquid is paintable and temperature/UV resistant resulting in lasting repairs!
Features:
- Seals Out Water, Air, and Moisture
- Creates a Protective Coating
- Flexible
- Paintable
- Temperature Resistant
- UV Resistant
- Self-Leveling
- Apply by Brush, Roll, Trowel, Dip or Pour
Specification:
- Brand:Â Gorilla
- Product Type:Â Rubberized Liquid Coating
- Adhesive Level: High
- Colour: White, Clear, Black
- Container Size:Â 32 oz
- UV Resistant: Yes
- Minimum Application Temperature:Â 50 degrees F
- Maximum Application Temperature:Â 120Â degrees F
- Moisture Resistant: Yes
- Compatible Material: Tile, Rubber, Fabric, Wood, Aluminum, Brick, Glass, Concrete, Metal
- Cure Time: 1 to 2 Days
- Paintable: Yes
- Indoor/Outdoor: Both
- Gap Filling:Â up to 1/4"
- Shelf Life:Â 2 years unopened
Instruction to Use:
- Clean the surface of dirt, dust, grease, and oil. Make sure the surface is dried completely.
- Stir the contents for 30 seconds until it is thoroughly mixed.
- Apply to the surface by brush, roll, trowel, dip or pour. Ensure the surface is completely covered.
- Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24-48 hours
NOTE: Test the finished project with light water exposure to ensure all cracks have been filled. If the test fails, apply additional coats. Do not use for gaps larger than 1/4″. Apply between 50F and 120F.
PAINTING: Works with both latex and oil-based paints. When coating with oil-based paints, use a primer first before painting.
CLEAN UP: Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as brushes and rollers.
