Ingco GWP302 3-Inch Max Head 7.0HP Gasoline Water Pump
The INGCO GWP302 gasoline water pump is designed for high-volume water transfer where dependable flow and lifting performance are required. Its 7.0HP gasoline engine with 208cc displacement powers a 3-inch pump connection, supporting a maximum flow of 1000L/min and a maximum head lift of 32m. The pump also provides a maximum suction head of 8m, making it suitable for moving water across demanding transfer applications. A 3.6L fuel tank supports operation, while the recoil starting system provides manual engine starting.
The 80mm (3-inch) suction and discharge ports are matched for the specified pump configuration. The unit is supplied packed in a carton box. Battery and charger specifications are not applicable because this model uses a gasoline engine rather than a battery power system. Use the GWP302 for water transfer tasks requiring a gasoline-powered pump with high flow capacity and substantial head lift. It is intended for appropriate water pumping and transfer applications.
Features
- 7.0HP gasoline engine with 208cc displacement
- 3-inch (80mm) suction and discharge ports
- Maximum flow rate of 1000L/min
- Maximum head lift of 32m
- Maximum suction head of 8m
- 3.6L fuel tank
- Recoil starting system
Specification
- Brand: INGCO
- Product Type: Gasoline Water Pump
- Model: GWP302
- Port Diameter: 80mm (3 inch)
- Max. Flow: 1000L/min
- Max. Head Lift: 32m
- Max. Suction Head: 8m
- Engine Power: 7 HP
- Engine Displacement: 208cc
- Tank Capacity: 3.6L
- Starting System: Recoil