Bellinzoni ANTIAQUA Water Based Waterproofing Agent - 5 Litre

Bellinzoni ANTIAQUA Water Based Waterproofing Agent - 5 Litre

Clear impregnating agent for protection of buildings façades made of concrete, cement, bricks, terracotta, or unpolished stones (limestone, sandstone) against rain and weathering. ANTIAQUA lets the material breath, it penetrates deeply into the material, does not change the original color; does not make any films but catalyzes into the stone giving a good protection. It prevents the formation of mildew Good resistance to UV rays.

Features:

• Good resistance to UV rays
• Protective for sandstone, bricks, and concrete
• It prevents the formation of mildew
• Clear impregnating agent for protection of building façades made of concrete, cement, bricks

Specification:

• Brand: Bellinzoni
• Product Type: Waterproofing Agent
• Container Size: 5 Litre
• Waterproof: Yes
• Product Foam: Liquid
• Colour: Clear Transparent
• Odour: Characteristic
• Drying Time: 24 hours
• Shelf life: 24 Months from Production Date
• Application Surface: Limestone, Sandstone, Terrazzo, Cement, Gypsum, Plaster
• Application Tools: Brush, Roll, Cloth, Mop, Fleece 
• Coverage: For the protection of cement, one liter of product can treat 10 to 15 sqm (120/200 sq.ft.), depending on the absorption and degree of finish of the material.
• Storage: Store for 24 months from the production date in its original packaging (unopened container) between 5° and 30° C in a cool, dry place.

Instruction for use

Surface must be clean and dry; stains, mildew, crusting must be scraped off otherwise they will be harder to remove after protection. Application can be done by brush, by roller or by spray gun. It is suggested, when possible, to apply ANTIAQUA by brush because it allows the product to penetrate well into the surface. Application of ANTIAQUA by brush, making pressure, will facilitate penetration into frames and cavities. Let the product dry naturally and the stone will be protected. In case of excess of product, the same can be removed using a dry cloth or paper towel damp with ANTIAQUA.

During the application and subsequent drying, the temperature of the substrate should be between 10 and 30°C

Suggestions for use and recommendations:

1. We recommend applying the product until the stone is completely saturated, taking care to apply it wet on wet, i.e., without leaving the first coat to dry but continuing the application.
2. Do not dilute the product with water or other solvents because the preparation is ready for use.
3. The material to be treated must be dry
4. Once treated, the material must be left to dry for 24 hours to complete polymerization.
5. It is not suggested to use the product on marble or granites, specially polished.
6. Before use read carefully recommendations printed on the label and always make a preliminary test.